A shower remodel in Florida costs between $3,500 and $15,000 depending on size, materials, and whether plumbing is being moved. A basic tub-to-shower conversion runs $3,500–$6,000. A mid-range walk-in shower remodel with tile work and a frameless glass door lands at $6,000–$10,000. A custom master shower with premium tile and built-in niches typically costs $10,000–$15,000 or more.
What Is the Average Cost of a Shower Remodel in Florida?
The average shower remodel in Central Florida costs around $7,500 for a mid-range scope. That covers demolition, cement board substrate, full tile surround, a pre-sloped shower pan, and a basic frameless glass door. Material quality, tile size, and fixture choices push that number up or down significantly.
Here is how typical shower remodel scopes break down by cost range in the Florida market:
| Scope | Low End | High End |
| Tub-to-shower conversion (basic) | $3,500 | $5,500 |
| Walk-in shower — standard tile & glass | $6,000 | $9,000 |
| Custom master shower — premium finishes | $9,500 | $15,000+ |
| Shower + full bathroom remodel combo | $12,000 | $30,000+ |
These ranges reflect real project costs in the Orlando metro as of 2026. Labour rates in Central Florida are mid-range compared to Miami and Tampa but have risen 12–15% since 2022. Always get a written, itemised estimate — not a verbal range.
If you want a cost estimate specific to your bathroom, Property Fixology’s Cost Estimator tool gives you a ballpark in under two minutes based on your scope.
What Factors Drive the Cost of a Shower Renovation Up or Down?
Seven factors have the biggest impact on shower remodel cost. Understanding them before you get quotes means you can compare bids accurately — and make informed trade-offs.
1. Tile selection. Tile is the single largest variable. Standard 12×24 ceramic tile costs $3–$6/sq ft installed. Large-format 24×48 porcelain runs $12–$18/sq ft installed because it requires a flatter substrate and slower, more precise cutting. Handmade or natural stone tile can reach $25–$40/sq ft installed.
2. Glass enclosure type. A semi-frameless shower door costs $600–$1,200 installed. A fully frameless glass panel system costs $1,800–$4,500 depending on the number of panels and hardware finish.
3. Plumbing changes. Relocating a drain, adding a second showerhead, or running a new supply line adds $800–$2,500 in plumbing rough-in costs and typically requires a permit.
4. Shower size. Labour and material costs scale with square footage. A 36×36 standard shower costs significantly less to tile and waterproof than a 60×36 walk-in. Every additional linear foot of tile adds $150–$300 in installed cost.
5. Niche and seat. A built-in tile niche adds $300–$600 depending on size. A tiled bench seat adds $500–$1,200. Both require additional waterproofing layers and precision tilework.
6. Fixture quality. A builder-grade showerhead and valve set costs $180–$350. A thermostatic valve with rainfall head, hand shower, and body sprays can cost $900–$3,000 in fixtures alone — before labour.
7. Waterproofing method. Sheet membrane waterproofing (e.g. Schluter Kerdi or RedGard) is the current Florida standard. It adds $600–$1,200 to the project cost but is non-negotiable for Florida’s humidity and prevent mould behind the tile for years.
How Does Shower Size and Layout Affect Remodeling Costs?
Shower size affects cost in a direct, predictable way: more square footage means more tile, more substrate, more waterproofing, and more labour hours. The layout — corner shower, alcove, or open wet room — affects how complex the glass and door situation gets.
Corner showers (36×36 to 42×42) are the most common in Central Florida homes. They cost less to tile because the wall area is smaller, but a corner glass door configuration (two fixed panels plus a door) costs more than a single alcove door. Budget $5,500–$8,500 for a full corner shower remodel.
Alcove showers (30×60 or 36×60) are a single door or sliding glass setup. Tile area is higher than a corner shower, but the glass setup is simpler and less expensive. Budget $6,000–$10,000.
Large walk-in or barrier-free showers (48×48 or larger) are now the top requested upgrade in higher-value Central Florida homes. No door to buy, but the open entry requires a linear drain and precision-sloped floor tile — both of which add cost. Budget $8,000–$18,000 depending on size and finish level.
The key lesson: a bigger shower costs more to build but saves on glass. A smaller shower costs less to tile but the glass can represent 30–40% of the total project cost if it’s a complex frameless setup.
Seen enough to want a real number for your bathroom? At Property Fixology, we assess the existing shower, measure the space, and give you a written, itemised quote — not a range that doubles by the time we’re done. Visit our Shower Remodel page or get a free estimate — call (407) 885-5935.
What Is the Difference in Cost Between a Tub-to-Shower Conversion and a Custom Walk-In Shower?
A tub-to-shower conversion is the most affordable shower remodel option. It involves removing an existing bathtub, installing a new drain in the right position, waterproofing the walls and floor, tiling the surround, and adding a door or curtain. The existing plumbing footprint stays in place, which keeps labour and permitting costs low. Most tub-to-shower conversions in Central Florida come in at $3,500–$6,000.
A custom walk-in shower remodel is a different project altogether. You are building a new shower from the substrate up — and typically relocating the drain, expanding the footprint, and upgrading the tile and glass significantly. You are also much more likely to encounter hidden waterproofing failures in the existing bathroom that need to be addressed before tiling can begin.
The cost premium for a custom walk-in shower over a tub conversion is typically $4,000–$9,000 — driven by tile area, glass cost, and the scope of the structural work. If the existing tub surround has moisture damage behind it (very common in Florida homes over 15 years old), add $800–$2,000 for substrate replacement before any new tile goes up.
One important note: if you are converting the only bathtub in your home, consider the resale implication before committing to a shower-only layout. Families with young children and buyers in certain price brackets still expect at least one bathtub. If you have two bathrooms, the conversion is usually straightforward. If you only have one, have the conversation with your contractor before demo begins.
How Do You Get an Accurate Shower Remodel Estimate in Central Florida?
An accurate shower remodel estimate requires a contractor to physically assess the bathroom. Any number you get online, over the phone, or from a contractor who has not seen the space is a ballpark — and ballparks are how renovation budgets get blown.
Here is what a proper assessment covers:
Existing condition inspection. The contractor checks the current shower pan for leaks, the wall substrate for moisture, and the drain for position. Florida homes built before 2000 often have galvanised drain lines and single-layer drywall behind tiles — both of which need replacement before new tile goes up.
Plumbing scope confirmation. If you want to move the shower valve, add a second head, or change the drain position, this needs to be quoted by a licensed plumber before tile work is priced. Surprises in plumbing scope are the most common cause of mid-project cost increases.
Tile selection. The material cost difference between a $3/sq ft ceramic and a $15/sq ft porcelain is significant at scale. Walk the estimate with your contractor holding the actual tile in hand — not estimating from a photo.
Written, itemised quote. A good contractor breaks the quote into demo, waterproofing, tile labour, glass, plumbing, fixtures, and clean-up. If you receive a single-line quote, ask for the breakdown. It is the only way to compare two bids fairly.
Property Fixology provides written, room-assessed estimates for every shower remodel project. See our custom bathroom tile installation service page for more on how we approach tile work specifically.
Frequently Asked Questions About Shower Remodel Costs in Florida
How much does a shower remodel cost in Florida?
A shower remodel in Florida costs $3,500–$15,000 depending on scope. A basic tub-to-shower conversion runs $3,500–$6,000. A mid-range walk-in shower with tile and frameless glass lands at $6,000–$10,000. A custom master shower with premium tile, built-in niches, and a rain head typically costs $10,000–$15,000 or more.
How long does a shower remodel take?
A shower remodel in Central Florida typically takes 5 to 10 business days from demo to final inspection, depending on scope. A straightforward tub-to-shower conversion can be completed in 4–5 days. A full custom shower with new plumbing rough-in, large-format tile, and custom glass usually takes 8–12 days.
Do I need a permit for a shower remodel in Florida?
Yes — in Florida, any shower remodel that involves moving or adding plumbing requires a permit from your local building department. Cosmetic work such as retiling an existing shower pan and walls in the same footprint typically does not require a permit. Always confirm with your contractor before work begins.
What is the most expensive part of a shower remodel?
Tile labour and custom glass enclosures are typically the most expensive line items in a shower remodel. Large-format tiles (24×48 or larger) require a perfectly level substrate and precision cuts, which adds installation time. Frameless glass doors and panels are fabricated to measure and carry both a material premium and a skilled installation cost.
Is a shower remodel worth the investment in Florida?
Yes — a shower remodel consistently delivers strong ROI in the Florida market. Updated bathrooms recover 60–70% of remodel cost in resale value, and a modern walk-in shower is one of the top buyer-requested upgrades in Central Florida. Beyond resale, an improved daily-use shower adds tangible quality-of-life value for the homeowner.
Ready to Get a Real Shower Remodel Quote?
Property Fixology’s Shower Remodel service covers every stage — demo, waterproofing, tile, glass fabrication and installation, fixtures, and final inspection. We serve homeowners across Central Florida including Orlando, Winter Park, Winter Garden, Maitland, Lake Nona, and Dr. Phillips.
Get a free shower remodel estimate and we will assess your bathroom in person, give you a written itemised quote, and walk you through the scope — no guessing, no inflated ballparks. Call (407) 885-5935 or book online.